3rd International Symposium on High Temperature by Tao Jiang,Jiann-Yang Hwang,Patrick Masset, et al.John Wiley
By Tao Jiang,Jiann-Yang Hwang,Patrick Masset, et al.John Wiley & Sons, Inc.|Wiley||Wiley-TMSAdult NonfictionTechnologyLanguage(s): EnglishOn sale date: 02.08.2012Street date: 09.05.2012Preview
Read or Download 3rd International Symposium on High Temperature Metallurgical Processing PDF
Best extraction & processing books
Modelling of powder die compaction
Manufacture of elements from powders usually calls for a compaction step. this is often primary within the powder metallurgy, ceramic, hardmetal, magnet, pharmaceutical, refractory and different sectors to make whatever from advanced gears for vehicles to tablets to dishwasher pills. improvement of the tooling to fabricate an element could be a lengthy strategy with a number of iterations.
This booklet provides a hugely built-in, step by step method of the layout and building of low-temperature dimension equipment. it really is successfully books in a single: A textbook on cryostat layout options and an appendix info instruction manual that offers materials-property facts for undertaking that layout.
Advanced Biomaterials: Fundamentals, Processing, and Applications
Allows readers to take complete benefit of the newest advances in biomaterials and their functions. complicated Biomaterials: basics, Processing, and purposes experiences the most recent biomaterials discoveries, permitting readers to take complete good thing about the latest findings so one can strengthen the biomaterials study and improvement.
Nanostructured metals and alloys: Processing, microstructure, mechanical properties and applications
Nanostructured metals and alloys have improved tensile power, fatigue power and ductility and are appropriate to be used in purposes the place power or strength-to-weight ratios are vital. half considered one of this crucial ebook reports processing ideas for bulk nanostructured metals and alloys. components and 3 speak about microstructure and mechanical homes, when half 4 outlines purposes of this new classification of fabric.
- Fundamentals of Latex Film Formation: Processes and Properties (Springer Laboratory)
- Handbook of Mathematical Relations in Particulate Materials Processing
- Rheology and Processing of Polymeric Materials: Polymer Rheology
- Ions in Polymers
Additional info for 3rd International Symposium on High Temperature Metallurgical Processing
Sample text
It is also possible to stop for a short while the copper flow and restart casting without any problems. Figure 6. Slide Gate with Heat Protection Shield in O Operation. The limiting factor for the lifetime of the installed refractories is the oxygen lancing in cases where the copper freezes in the tap hole. With the help of the above described nitrogen purging via the lower plate the tap hole can be kept open or during sporadic heats leaves only a thin layer to be lanced. Thus the wear of the inner nozzle is significantly reduced and a life time of more than six weeks was obtained.
With the help of the above described nitrogen purging via the lower plate the tap hole can be kept open or during sporadic heats leaves only a thin layer to be lanced. Thus the wear of the inner nozzle is significantly reduced and a life time of more than six weeks was obtained. The plates show a lifetime of up to 16 heats and the well block hasn't to be changed during the two years life time of the anode furnace. Only small gunning repairs were necessary. Summary of Benefits • Improved safety for operators due to remote controlled opening and closing procedure.
Results Some of the results from furnace operation are summarized in Table I Table I: A summary of metal produced, dust produced, and effect spent. kWhpr Time Metal Furnace Dust Tapnr Real time hours produced produced production effect period kW kg kg 12 1 15:00 4,65 1742 145 1,59 2 214 1,5 4,5 170 0,02 16:30 18:17 3,6 1,75 3 253 170 0,09 20:11 4 3,52 2 254 0,01 147 22:02 2 5 261 3,97 160 0,01 2 2,37 24:09 5,44* 172 6 308 8,4 2 26:15 7 306 15,43 168 0,85 28:00 8 3,35 1,75 140 280 9 30:34 2,5 7,32 311 150 4,0 18,2 33:00 10 2,5 0,70 305 164 1,2 2,5 302 15,22 164 11 35:28 12 3,25 164 27,3 38:45 398 12,39 41:41 3 162 1,0 379 4,5 13 164 14,36 381 0 3 14 44:27 1 38 kWh/kg Si 374,62 47,55 70,28 72,16 65,74 129,95 36,43 83,58 42,49 16,76 19,84 32,12 84,22 - The temperature and off gas analysis was measured close to the furnace surface.